The EcoPleat Pleated Air Filer incorporates a 100% synthetic media with an average atmospheric efficiency of 25% to 30% and an average arrestance exceeding 90% by weight. The 50mm filters handle velocities up to 2.54 m/s – the 100mm filters up to 3.18 m/s.Download Brochure
The EcoPleat Pleated Air Filer incorporates a 100% synthetic media with an average atmospheric efficiency of 25% to 30% and an average arrestance exceeding 90% by weight. The 50mm filters handle velocities up to 2.54 m/s – the 100mm filters up to 3.18 m/s.
The media is bonded to a metal grid on the air-leaving side, preventing vibration, and maintaining uniformity of the pleats. The filter pack is enclosed in a heavy-duty, moisture resistant, die-cut frame that will not warp, crack or distort under normal operating conditions.
Front and back media retainers are an integral part of the filter frame. The media pack is bonded to every part of the frame, preventing any possibility of air by-pass. Integral pleat separators on the 100mm filter provides additional pleat stabilization for the most demanding applications.
It is possible for a flat filter to face load, thus restricting airflow and placing unnecessary strain on equipment.
The EcoPleat filters accumulate the heavier, more restrictive particles at the bottom of the pleats, leaving the sides open longer for effective filtration. The EcoPleat filter media is engineered to provide maximum efficiency. In general, deeper pleats result in longer filter life and more time between changeovers.
- Achieves G4 (M5 also available if required)
- Rigid construction with consistent media extends the service life.
- Longer service life means lower operating costs
- Moisture resistant 100% synthetic media
- Well-built, efficient and easy-to-handle medium efficiency filters
- Low initial pressure drop
- Consistent efficiency results
- A wide range of sizes in 50mm and 100mm thicknesses
- Conforms to U.S. and/or EU fire classification standards.
These filters can be used without modification in side- access filter housings or front withdrawal holding frames. They offer better efficiency than conventional washable flat or pleated filters. The EcoPleat filters, when used as pre-filters, substantially extend the life of more expensive high-efficiency filters. They are the perfect filter for residential, commercial and industrial use.
Service and maintenance can also be carried out by our trained service technicians if required (ask our representative about our competitive service/maintenance contracts).
Airflows and Resistance
|Filter Depth||Medium Velocity (m/s)||Initial resistance Medium (Pa)||High Velocity (m/s)||Initial resistance High (Pa)||Final Resistance (Pa)|
|Part Number||Nominal size (inch)||Actual Size (mm)||Capacity|
|EP412242||12 x 24 x 2||295 x 595 x 25||0.353|
|EP414202||14 x 20 x 2||349 x 495 x 45||0.343|
|EP415202||15 x 20 x 2||371 x 495 x 45||0.367|
|EP416202||16 x 20 x 2||395 x 495 x 45||0.392|
|EP416252||16 x 25 x 2||395 x 622 x 45||0.490|
|EP418242||18 x 24 x 2||450 x 595 x 45||0.529|
|EP420202||20 x 20 x 2||495 x 495 x 45||0.490|
|EP420242||20 x 24 x 2||495 x 595 x 45||0.588|
|EP420252||20 x 25 x 2||495 x 622 x 45||0.612|
|EP420302||24 x 24 x 2||595 x 595 x 45||0.705|
|EP424242||20 x 30 x 2||495 x 750 x 45||0.734|
|EP412244||12 x 24 x 4||295 x 595 x 95||0.470|
|EP416204||16 x 20 x 4||395 x 495 x 95||0.517|
|EP416254||16 x 25 x 4||395 x 622 x 95||0.658|
|EP418244||18 x 24 x 4||450 x 595 x 95||0.706|
|EP420204||20 x 20 x 4||495 x 495 x 95||0.658|
|EP420244||20 x 24 x 4||495 x 595 x 95||0.785|
|EP420254||20 x 25 x 4||495 x 622 x 95||0.823|
|EP424244||24 x 24 x 4||595 x 595 x 95||0.940|