Description

The Aerostar SoniQ Pocket filter is constructed with a moisture-resistant, ultrasonically welded media. This synthetic media consists of strategically layered and blended melt-blown polypropylene fibres fastened to a non-shed, high density polypropylene backing. This design creates a dual stage filtration effect with the final layer capturing the smaller particulate from the air stream. The patented ultrasonic welding process allows us to manufacture a product that has no stich holes in the media and provides a substantial increase in effective surface area.

Vertical separators are incorporated into each pocket to effectively channel air throughout the media to prevent excessive turbulence and allow even contaminant loading over the life of the filter. The header is constructed from 26# galvanised steel with rolled edges to provide rigid support to the filter face and allow for easier handling.

Benefits

The SoniQ pocket filter offers high efficiency filtration while maintaining low resistance to airflow. The non- shed media eliminates fibre migration downstream and the ultrasonic welding provides lower resistance with no disruption to the integrity of the filter. The open face design and the precise pocket spacing produces a product that is aerodynamically balanced and provides excellent all-round performance.

Features

• High efficiency filtration
• Merv12-14 (F6 - F8)
• 100% non-shed synthetic media.
• Ultrasonic welded seams
• Low initial pressure drop
• Large effective surface area
• Intergrated vertical separators
• Galvanised steel header for rigid support
• Conforms to U.S. and EU fire classification standards (UL 900-class 2)
• U.S. Patents 6159316 and 6258142

Applications

The SoniQ pocket filters are designed as primary or secondary filters in heating, ventilation and air conditioning systems. Superior dust holding capacities allow these filters to be used in most commercial and industrial applications as well as hospitals, automotive plants and biotechnology facilities.

SoniQ pocket filters can be used in most standard built- up filter banks, or side–access filter housing systems.

Service/Maintenance

Service and maintenance can also be carried out by our trained service technicians if required (ask our representative about our competitive service/maintenance contracts).

1. Ultrasonic Weld.

   Provides a superior reduced sealing area for lower initial and overall resistance as well as eliminating the possibility of air bypass.

2. Aerodynamic Design

   Each bag filter pocket is dynamically balanced by design for minimal resistance to airflow and high dust holding capacity.

3. Longitudinal Separator Strips

   Each pocket of layered media is divided into channels using a proprietary ultrasonically welded design to better withstand high pressures and turbulence

4. Dual Fastening

   Each pocket is individually secured to a support module, which is both mechanically and chemically fastened inside the header frame

5. Soft Edge Headers

   Pockets are attached to a soft-edged support frame creating a tight seal without risk of flexing during full inflation.

6. Media

   Meltblown fibres are more resistant to mishandling and virtually eliminate the possibility of fibre shedding into the air stream.

Specifications

Filter Media

Synthetic polypropylene

Header

26# Galvanised steel

Flammability

UL Class 2

Recommended final resistance:

250 Pa

Max. Temp:

65°C

Features and Benefits

• Low Initial Resistance

  Reduced energy consumption

• Greater Effective Meadia Area

  Longer service life

• Elimination of Holes in Media

  Enhanced efficiency

• Improved Indoor Air Quality

  Reduced maintenance costs. Greater productivity.